BHTDX - BIOLON RETENTION BEADS
- MSDS: BHTDX
- Manufacturer: CAULK DENTSPLY
- Product Name: BIOLON RETENTION BEADS
- National Stock Number: 6520-00F010739
Product Identification
Product ID:BIOLON RETENTION BEADS
MSDS Date:01/01/1987
FSC:6520
NIIN:00F010739
MSDS Number: BHTDX
Responsible Party
MILFORD, DE 19963
Emergency Phone: (302) 422-4511
Info Phone: (302) 422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
DIALKYL PHTHALATE
CAS: 66587-56-2
RTECS: TI0585000
Fraction By Weight: <5%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IT'S NOT KNOWN TO CAUSE SIGNIFICANT
HEALTH PROBLEMS. IT'S CONSIDERED AN INERT OR NUISANCE DUST. EYES:
KEEP DUST OUT TO PREVENT POSSIBLE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IT'S NOT KNOWN TO CAUSE SIGNIFICANT HEALTH
PROBLEMS. IT'S CONSIDERED AN INERT OR NUISANCE DUST. EYES: KEEP OUT
TO PREVENT POSSIBLE IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GET MED ATTN. EYES: FLUSH
W/WATER FOR 5 MINUTES. SKIN: WASH W/SOAP & WATER. INGESTION: RINSE
MOUTH OUT W/WATER. CALL DOCTOR.
Fire Fighting
Flash Point Method:CC
Flash Point:304C
Extinguishing Media:CO2, DRY CHEMICAL, HALON, & WATER. AVOID
EXTINGUISHING METHODS WHICH MAY GENERATE DUST CLOUDS.
Fire Fighting Procedures:WATER STREAM CAN DISPERSE DUST IN AIR,
PRODUCING A FIRE HAZARD & POSSIBLE EXPLOSION HAZARD IF EXPOSED TO
IGNITION SOURCES. FIRE FIGHTERS SHOULD WEAR SCBA.
Unusual Fire/Explosion Hazard:POLYMER DUST IS COMBUSTIBLE. THE
EXPLOSIVE LIMITS OF THE POLYMER PARTICLES SUSPENDED IN AIR ARE
APPROXIMATELY THOSE OF COAL DUST.
Accidental Release
Spill Release Procedures:SWEEP UP TO AVOID SLIPPING HAZARD. KEEP
AIRBORNE PARTICULATE AT A MINIMUM WHEN CLEANING UP SPILLS.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE. KEEP
CONTAINER CLOSED TO PREVENT WATER ABSORPTION & CONTAMINATION. STORE
AWAY FROM FOOD & BEVERAGES.
Other Precautions:OBSERVE NORMAL WAREHOUSING PROCEDURES.
Exposure Controls
Respiratory Protection:NUISANCE DUST TYPE IF NEEDED
Ventilation:LOCAL EXHAUST: PROCESSING EQUIPMENT
Protective Gloves:IF HOT PLASTIC IS HANDLED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
Chemical Properties
Solubility in Water:NOT SOLUBLE
Appearance and Odor:CLEAR FREE FLOWING BEADS W/CHARACTERISTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT >30C
Hazardous Decomposition Products:METHYLMETHACRYLATE, CO
Disposal
Waste Disposal Methods:MAY BE DISPOSED OF IN LANDFILL OR INCINERATED.
FOLLOW FEDERAL, STATE, & LOCAL REGULATIONS FOR DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.